Installation Guide Video
Step-by-Step Instructions
1
Enable the screen clean mode on your device to maximize screen brightness, making dust and fingerprints easier to spot before installation.
2
Use the included screen cleaner to carefully wipe away any dust, fingerprints, and smudges. Ensure the screen is completely clean before proceeding.
3
Align the positioning frame over your screen and press down firmly on all four corners to lock it in place. The frame ensures perfect alignment every time.
4
Hold the top edge of the positioning frame steady, then pull the release tab slowly and evenly to lay the tempered glass down onto the screen.
5
Wait a moment for the tempered glass film to fully adhere to the screen surface. Once settled, release the side buckle to free the frame.
6
Carefully lift off the positioning frame, then peel away the surface protective layer. Your screen protector is now fully installed!
💡
Tip: If bubbles appear, gently lift the corner nearest to the bubble and allow the glass to re-adhere naturally — no pressing needed.