Camping Tent with Canopy User Manual

1. Package Include

2. Cautions

WARNING: Not compatible with vehicles equipped with spoiler. Installation may cause damage to the spoiler.

(With spoiler)

(Without spoiler)

3. How to Use Tent Peg Stake

Canopy pegs should be angled at 60° and 3cm deep to secure the tent.

2. The purpose of the carabiner

WARNING: To prevent the tent from collapsing, ensure the trunk remains open and the carabiners are properly attached.

1.Open the trunk and locate the trunk latch.

2.Insert the carabiner into the tailgate latch until you hear a 'click' to confirm it's engaged.

3.For carabiner removal:press the trunk release button.It will eject automatically.

3. Tent Installation

1.With the trunk closed, drape the tent over the rear of the vehicle.

2.Adjust the magnets integrated into the tent's edge to ensure a sung fit against the cehicle's exterior panel.

3.Connect the hook to the tent rope and secure it to the wheel (using the gaps in the wheel hub).

4.Use the app to open the trunk.

5.The tent will be propped open as the trunk lid reaches its full height.

NOTE: Ensure the trunk opening height is set to the maximum.

5. Canopy Installation (Optional)

1.Hook the canopy rear center to the top of the tent roof.

2. Connect the pole sections end-to-end into a single pole.

3.Support the canopy's front with the pole. Secure all five corners to the ground with guy lines and pegs to finish.