FAQ: TPARTS Glass Roof Sunshade for Tesla Model 3 & Model Y
Storage Bag x 1
Sunshade x 2
Shade x 2
Manual x 1
Installation Clips x 10 (Model Y)
Installation Clips x 12 (Model 3)
Middle Juncture Clips (Model Y Only)
1. Use with caution when removing the sunshade from its packaging, as it will pop open to its full size.
2. Model Y clip positions:
8 clip positions on both sides, back and front (see red circle clip positions).
4 clip positions at the middle junctures (see white circle clip positions).
1. Model 3 clip positions: There are a total of 12 clip positions. Suggest 10 be installed (see the red circle clip positions).
2. The side with silver point polymerization coating faces outside of the car. Place the logo tag label above the driver seat for clip installation.
3. Place the sunshade next to the car frames respectively with corresponding sizes, and buckle up the clips (note that the clips are buckled up with the sides of the shade, the flat end is facing towards the car glass).
1. The side with silver point polymerization coating faces the outside of the car. Place the logo tag label above the driver seat for clip installation
2. Place the sunshade next to the car frames respectively with corresponding sizes, and buckle up the clips (note that the clips are buckled up with the sides of the shade the flat end is facing towards the car glass);
3. After installing the sunshade from the front and back, install the clips for the junctures.
