Welcome to our comprehensive FAQ guide for Tesla pedal covers. This article addresses common installation questions, quality issues, and troubleshooting tips to ensure you get the best experience with your pedal covers.
Whether you're installing them for the first time or encountering specific problems, you'll find detailed solutions here.
1. Installation Questions
How to Install Pedal Covers?
Installation Steps:
Brake pedal: Remove the original brake pedal cover first
The original cover is wrap-style - pry it off from back to front
Accelerator pedal: Install directly without removing the original pedal
Note:For the Model 3 Highland brake pedal, please refer to the picture to determine whether you need to install the included foam pad.
How to Reinstall Original Rubber Covers?
Professional Installation Required:
Original rubber covers need Tesla Service Center technicians
Please contact the staff of Tesla Service Center for installation assistance
2. Quality Issues & Troubleshooting
What should I do if the pedals falls while driving?
Under normal circumstances, our pedal lock design will not cause this situation. If the pedal falls off due to an accident
The decoration does not affect driving, please drive normally to a parking space
Take out the pedal that has fallen off and complete the rest of the journey without it
Contact us via service@tparts.com for further processing
Pedal Noise Problems
Brake Pedal Noise:
Cause: Factory tolerances in original pedal dimensions
Pad compression exceeding limits creates noise
Contact us via service@tparts.com for further processing
Accelerator Pedal Movement/Noise:
Up-and-down movement: Check backside foam placement
Foam should adhere tightly to pedal interior
Solution: Replacement foam available if shifted
Pedal Cover Safety Concerns
Emergency Response:
If pedal drops while driving: Pull over safely first
Pedal covers have ground clearance when detached
You can still operate brakes normally without covers
Safety Assurance:
Pedal covers are comfort accessories only
They don't affect vehicle safety systems
Not considered structural safety components
Pedal Clips Popping Open
Troubleshooting by Model:
Model Type |
Testing Method |
|---|---|
Model 3/Y |
|
Refreshed Model 3 |
|
Surface Wear Concerns
Understanding Normal Wear:
Material: Aluminum alloy with anodized finish
Shoes with embedded debris cause scratching
Even factory performance pedals show similar wear
Wear Resolution Policy:
Short-term wear: Contact us via service@tparts.com if unsatisfied
Aluminum Surface Detachment
Understanding Normal Wear:
Material: Aluminum alloy with anodized finish
Shoes with embedded debris cause scratching
Even factory performance pedals show similar wear
3. Special Scenarios
Material Quality Verification
Proof of Aluminum Alloy Material:
Here is a combustion test video as a reference for material durability.
Material Quality Verification
Pull Force Verification:
All products undergo rigorous strength testing before shipment.
The installation security and long-term durability are thoroughly verified.
Important Notes: Contact customer service via service@tparts.com for any installation or usage issues. Keep purchase receipts for complete after-sales service. Regional variations may affect product specifications and installation requirements.